Testimonials

I been selling Opti Oil for almost 30 yrs now. I have never seen a oil failure from using Opti Oil . Our Shop Generators have been using since they was new and some of them are over 20yrs old. We use them in all the Home Standby Generators that we service, I use all there products in all my Equipment and all the Equipment that we repair and sell new. You won't go wrong by using Opti Oil. Our Sales Rep was call Opti Al '' may he R.I.P ''

At my first isdt race in Germany 1962 I got sponsored by then called optimal oil, where they mixed already 50 to 1 when everyone was mixing 20 to 1. We were called crazy and would not make it one single day. I finished all 6 days and won a gold medal. In the 70's Opti came to Canada and the USA with improved oil mixing 100 to 1. I have never used anything else and never had a problem. Thank you Opti......,

I've been using Opti 2 two stroke oil for many years but
I had an issue however Paul addressed it straight away
I couldn't be more pleased with the customer service!
So I decided to write a review.
About the product Opti 2; My Redmax dealer turned me on to Interlube products what sold me, was a test you can do @ home clean the exhaust on your machine prior to running Opti 2 now run Opti 2 & run the tank out and check the exhaust you'll find you'll have little to no oil residue on the exhaust port, To me that's a testament how clean it burns! Try out a bottle you'll never put anything else in your equipment If you care about the planet and your equipment....
I ride vintage 2 stroke motorcycles so I know a thing or two about oils!

We use on average 1400 gallons per year of mixed 2-cycle fuel. We've used exclusively Opti 2-cycle oil for the last 2 years. I can't say enough of how much this has helped our mid-size lawn maintenance operation! Previous to using Opti we would have 5+ 2-cycle pieces of equipment in the repair shop per month. Now after Opti we have yet to need any equipment repaired. Several times per year we have had employees accidentally run straight gas in our 2-cycle equipment and even with that big mistake we haven't had any equipment seize up! We always mix our fuel at 100:1 and with non-ethanol fuel. I'm a firm believer in your products and will continue to use them until I retire!

Greetings 2-stroke fans. This will be my second testimony to the prior of 4 years ago. 4 years in the running has really put this product to the test for me. I purchased a new saw since my last review and used opti from the get-go. It has been 4 years using this saw in full time forestry along with splitting fire wood (yes splitting) about 5 cord per year and the saw still runs as the day it was purchased. But that is not my big awesome. Another saw I have that I had been using with the Opti for about a year went down on me right in the middle of a big job. It made a lot of noise when trying to restart so i set it aside for some time and ordered the rebuild parts based on experience. During disassembly I had found that the cylinder had loosened up in turn creating a massive lean condition. First thoughts where SAW IS FRIED. Much to my amazement only the crank and bearings had failed. The cylinder and piston were perfect, the 2 things that should have went first. If using standard oil that saw would have been junk. That's my big awesome. Interlube corp, thank you again for a great product that may just do more than intended. No reason for me to ever try anything else unless it is new and improved from Interlube. Happy 2-stroking every one.